Easy Brackets easy on/off bolt on saddlebag support system.  

A PRODUCT OF

 
Easy Bracket Motorcycle Accessories Homepage
About Easy Brackets Motorcycle Accessories
Contact Easy Brackets
Easy Bracket Dealer List
Easy Bracket Motorcycle Accessories - Saddlebag Bolt-on Systems
Compare Easy Brackets Saddlebag Bolt-on system to Ghost Bracket's system.
Read some of our Customer Testimonials!
Easy Bracket Motorcycle Accessories Homepage

No Restocking Fees!

Easy Bracket easy on/off saddlebag supports.  All Models only $149.95

Satisfaction

Guaranteed

TS/License Plate Relo Kits available for Softails,
Dynas
including 2010 and later FXDWGI
and
Sportster
including Nightster-48-72 & Iron 883


Product Info:
Pick Your Motorcycle
 
Excelsior Henderson
Harley Davidson
Honda Motorcycles
Indian
Kawasaki
Suzuki
Triumph
Victory
Yamaha Motorcycles

Leather Motorcycle Saddlebags and Easy Brackets Motorcycle Accessories

 

Honda Motorcycle Saddlebag Bolt-on Systems

  Easy Bracket easy on/off saddlebag bolt-on system.Easy Brackets are an innovative two (2) point docking system that allows the quick and easy installation and removal of saddlebags.  Easy Brackets use two (2) existing bolts holes in the fender rail of the motorcycle.  By replacing the existing bolts with the docking posts and longer bolts provided in each kit, the Easy Brackets can then be instantly installed and locked into place.

Because we make our Easy Brackets specifically for your Honda motorcycle model, you will receive all of the correct hardware with your order.  The docking posts and bolts are especially designed to work perfectly with your Honda motorcycle, eliminating the hassles of adding spacing washers to either line up the docking posts or to achieve a good, tight fit.

All models are $154.95 per set (both sides) and includes all necessary hardware. For product details, see our 'About' page.

If you want to convert your saddlebags on your Honda motorcycle to an easy-to-carry piece of luggage, be sure to check out our Easy-Tote system.  It's a single strap with special docking posts that connect together the saddlebags when they're off the motorcycle, mssssssssaking them easy to carry.

NEW: Watch our Easy Bracket Installation Video!

 

Honda Motorcycles

Choose your Motorcycle:

Shadow

"All Easy Bracket models available at Great Bike Gear" 

ACE-R1

ACE 750: The docking posts attach to the forward two mounting holes in the fender rail.

ACE-R1BR This model fits the ACE 750 with Backrest. This model comes with different docking posts.
AR0-R1

Aero 1100: The docking posts attach to two rear mounting holes in the fender rail.

AR0-R2

Aero 750: The docking posts attach to two rear mounting holes in the fender rail.

AR0-R2BR

Aero 750 with Backrest: This model comes with longer bolts.

SABR-R1

Sabre 1100: The docking posts attach to the rear two mounting hols in the fender rail.

SABR-R1BR

Sabre 1100 with Backrest: This model comes wtih longer bolts.

SABR-R1PDB

Sabre Ace and Spirit 1100. This is the same bracket as the SABR-R1 but comes with different hardware. The docking posts attach to the rear two mounting holes outside the backrest docking hardware. The backrest is not provided and must be purchased separately.

VLX-R1

Easy Brackets for Honda Shadow VLX 600 without Backrest. The docking posts attach to the two fender bolt holes in the fender rail.

VLX-R1BR

This model fits the Honda Shadow VLX600 with Hondaline Backrest. This kit comes with different docking hardware than the VLX-R1. The backrest is not included and must be purchased seperately. The docking hardware mounts outside the backrest side plate.

750RS-R1

This model fits the VT750RS, 2010 & later.The docking posts mount to the two mounting holes in the fender rail.

750RS-R1CBR

This model fits the VT750RS, 2010 & later with Cobra Backrest.This model comes with longer bolts. The backrest is not included and must be purchased seperately.

 

VT1300

"All Easy Bracket models available at Great Bike Gear" 

VT1300-R1BR

VT1300.This model fits the VT1300 Interstate, Stateline & Sabre with Honda backrest side plates P/N 08F75-MFY-101. (Backrest side plates not provided, must be purchased separately) This kit will also work if the backrest is equipped with a luggage rack. NOTE: Due to possible inconsistensies in the motorcycle frame, shimming of the docking posts to achieve the proper alignment may be necessary. The kit includes 8mm SS washers for that purpose.

Magna

"All Easy Bracket models available at Great Bike Gear" 

MGA-R1

Magna: The docking posts attach to th two mounting holes in the fender rail.

MGA-R1BR

Magna with Backrest: This model comes with longer bolts.

 

Spirit and Phantom

"All Easy Bracket models available at Great Bike Gear" 

SPRT-R1

This model fits the Honda Phantom 750 and the Spirit 750C2 only. The docking posts mount to the two mounting holes in the fender rail.

SPRT-R1BR

This model fits the Honda Phantom 750 and the Spirit 750C2 only. This model comes with different docking posts and longer bolts.

SPRT-R1CBR

This model fits the Honda Phantom 750 and the Spirit 750 2007 & later with Cobra Backrest. This model comes with different docking posts and longer bolts. This kit only works on the Spirit 750 C2. Will not work for the Spirit 750 DC.

SABR-R1

ACE and Spirit 1100. The docking posts attach to the rear two mounting holes in the fender rail.

SABR-R1BR

ACE and Spirit 1100 with Backrest. This model comes with longer bolts.

SABR-R1PDB

Sabre Ace and Spirit 1100. This is the same bracket as the SABR-R1 but comes with different hardware. The docking posts attach to the rear two mounting holes outside the backrest docking hardware. The backrest is not provided and must be purchased separately.

 

Valkyrie

"All Easy Bracket models available at Great Bike Gear" 

VKE-R1

Valkyrie: The docking posts attach to the two mounting holes in the fender rail. This kit works with factory backrest.

 

VTX

  • VTX-1300C & 1800C models
    VTX-1800F Model

"All Easy Bracket models available at Great Bike Gear"

 
VTX-C1

1300 & 1800C Model & 1800F Model 2006 and earlier.  The docking posts attach to two rear mounting holes in the fender rail. Note: This model is used for motorcycles without backrest or luggage rack.

VTX-C1BR

VTX-C Model with Hondaline Deluxe Backrest only. See attached drawing for ordering instructions. This model is used on the 1800 VTX-C Model with a  Hondaline backrest. Backrest not provided, must be purchased separately. The docking posts attach to the backrest.  This kit comes with a special mounting plate for installation on the backrest.

VTX-C1BR-1

VTX-C Model with Hondaline Deluxe Backrest only. See attached drawing for ordering instructions. This model is used on the 1800 VTX-C Model with a  Hondaline backrest. Backrest not provided, must be purchased separately. The docking posts attach to the backrest.  This kit comes with a special mounting plate for installation on the backrest.

VTX-C1CBR

1300 & 1800C Model & 1800F Model with Cobra Backrest. Backrest not provided, must be purchased separately.

VTX-C1PDB

1300 & 1800C Model & 1800F Model with Paladin Backrest only 2006 and earlier. Backrest and hardware not provided, must be purchased separately.

VTX-C1SCBR

1300 & 1800C Model and 1800F Model with Show Chrome Backrest only 2006 and earlier: Easy Brackets for Honda: VTX 1300C, 1800C, 1800F (2006 and earlier) with Show Chrome Backrest. Backrest not provided, must be purchased separately.

VTX-C2

1300 & 1800C Model & 1800F Model 2007 and later.  The docking posts attach to two rear mounting holes in the fender rail. Note:  This model used for motorcycles without backrest or luggage rack.

VTX-C2JDB

1300 & 1800C Model & 1800F Model with Jardine Detachable Backrest all years. Backrest and hardware not provided, must be purchased separately.

VTX-C2PDB

1300 & 1800C Model & 1800F Model with Paladin Backrest only 2007 and later.Backrest and hardware not provided, must be purchased separately.

 
  • VTX 1300R & 1800R Models
    VTX 1800N Model
    VTX 1300S Model

"All Easy Bracket models available at Great Bike Gear"

 
VTX-R2

VTX-Retro & Neo-Retro Models (2006 and earlier) : The docking posts attach to two rear mounting holes in the fender rail. Note: This model used for motorcycles without backrest or luggage rack.

VTX-R2BR

1800 & 1300 VTX-Retro with Hondaline & Hondaline Deluxe backrest (2006 and earlier) : This model is used on the 1800 and 1300 VTX-Retro Models with a Hondaline Backrest. Will not work with the Neo-Retro backrest. Backrest not provided, must be purchased separately. The front docing post attaches outside the backrest and the rear docing post attaches to the rear vacant fender bolt hole.

VTX-R2PDB

VTX-Retro with Paladin Backrest: This model is used on the 1800 and 1300 R, N & S Models with a Paladin backrest. Backrest and hardware not provided, must be purchased separately.

VTX-R2CBR

VTX-Retro with Cobra Backrest: VTX-Retro with Cobra Backrest. This model is used on 130 and 1800R, N & S Models with Cobra Backrest only. Backrest not provided, must be purchased separately.

VTX-R2CWBR

VTX-Retro with Custom World Int. Backrest. This model is used on 1300 and 1800R, N & S Models with Custom World Int. Backrest only. Backrest not provided, must be purchased separately.

VTX-R3

VTX-Retro & Neo-RetroModels (2007 and later)   The docking posts attach to two rear mounting holes in the fender rail.

Note:  This model used for motorcycles without backrest or luggage rack.

VTX-R3BR

VTX-Retro with Hondaline & Hondaline Deluxe Backrest (2007 and later)Will not work with Neo-Retro backrest.

Backrest not provided, must be purchased separately. The front docking post attaches outside the backrest and the rear docking post attaches to the rear vacant fender bolt hole.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 

©2002-2005 Great Bike Gear, Inc.
1460 Ellerd Drive, Turlock, CA 95380
Tele:  866-521-3024  |  FAX:  209-527-3024
Home  |  About Us  |  Dealer Locations | Dealer Inquiries | Easy Bracket FAQ
Contact Us  |  Product & Fitting List | Compare to Ghost Brackets

The above may contain trademarks or service marks for motorcycles that are owned by other companies.  The use of these marks and motorcycle names is for reference only; it does not imply endorsement or affiliation.
Hit Counter
Quality is not Expensive... It's Priceless.