Harley Davidson

Softails

FLSTS/FLSTCI Heritage Classic

This system is designed to replace all factory hardware on the motorcycle and on the saddlebags while still using the factory Heritage saddlebags. If factory saddlebags are replaced with after market saddlebags see Models ST-R1 and ST-L1.

Heritage Softail 99 and earlier

Heritage Softail 99 and earlier with the detachable backrest. This is the same bracket as the HRT-R1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.

Heritage Softail 2000 - 2002

Heritage Softail 2000 - 2002 with detachable backrest. This is the same bracket as the HRT-R2 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.

Heritage Softail 2003 and newer

Heritage Softail 2003 and newer with detachable backrest. This is the same bracket as the HRT-R3 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.

• FXST/FXSTI Softail Standard
• FXSTB/FXSTBI Night Train
• FXSTS/FXSTSI Springer Softail
• FXSTC 2007 Softail Custom
• FLSTF/FLSTFI Fat Boy
• FLSTN/FLSTNI Softail Deluxe, Heritage Nostalgia & Heritage Special Note: The Softail Deluxe works with the ST-L1, ST-L1HB, ST-L1DB and ST-L1SDDB
• FLSTS/FLSTSI Heritage Springer (Does not fit Factory Saddlebags)
• FLSTSC/FLSTSCI Softail Springer Classic
• FXSTD/FXSTD1 Deuce

This model is used on all softail models except the 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB).  The docking posts attach to the front two mounting holes in the fender rail.  (6 ¼ “ apart)  May only be used with small to medium saddlebags to avoid relocation of turn signals.  If turn signals are to be relocated see ST-L1 

All Softails with Hardmount Backrest except the 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.

All Softails with Detachable Backrest except the 2006 & later FXST, FXSTB and FXSTS , 2007 & later FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB).This is the same bracket as the ST-R1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

This model is used on the 2007 FXSTC, Softail Custom. The docking posts attach to the front two mounting holes in the fender rail outside the backrest. (5 5/8” apart)  May only be used with small to medium saddlebags to avoid relocation of turn signals.  If turn signals are to be relocated see ST-L1.  If  the stock backrest is replaced with the detachable backrest use ST-R2DB.

Not used with factory Heritage saddlebags. See HRT Models. This model is used on all softail models.  The docking posts attach to the rear two mounting holes in the fender rail.  (9 ¼ “ apart).  Turn signals must be relocated off the fender to use all ST-L1 models. Turn signal relocation kits available from Great Bike Gear.

All Softails with Detachable Backrest. Will work with Softail Deluxe with Standard Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased seperately.

All Softails with Hardmount Backrest. This is the same bracket as the ST-L1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately.

FLSTN: Softail Deluxe with New Deluxe Detachable Backrest. This is the same bracket as the ST-L1 but comes with different hardware. The backrest is not provided and must be purchased seperately.

FXST/FXSTI  Softail Standard (2006 & later models only)
FXSTB/FXSTBI  Night Train (2006 & later models only)
FXSTS/FXSTSI  Springer Softail (2006 & later models only)
FLSTF Fat Boy (2007 & later only)
FSLSTSB Cross Bones (2008 & later)

This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models.  The docking posts
attach to the front two mounting holes in the fender rail. (5 5/8” apart)  May only be used with small to medium saddlebags to avoid relocation of turn signals.  If turn signals are to be relocated see ST-L1 

This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models with Hardmount Backrest This is the same bracket as the ST-R2 but comes with different hardware. The docking posts mount outside the backrest. The backrest is not provided and must be purchased separately.

This model is used on 2006 & later FXST, FXSTB and FXSTS, 2007 & later FLSTF and 2008 & later FLSTSB models with Detachable Backrest.  This is the same bracket as the ST-R2 but comes with different hardware.

FXSTC 2007 & later Softail Custom

This model is used on the 2007 FXSTC, Softail Custom. The docking posts attach to the front two mounting holes in the fender rail outside the backrest. (5 5/8” apart)  May only be used with small to medium saddlebags to avoid relocation of turn signals.  If turn signals are to be relocated see ST-L1.  If  the stock backrest is replaced with the detachable backrest use ST-R2DB.

This models is used on the deuce, all years. This kit is to be used with a Mounting System for "The Deuce" DMS-EB manufactured and sold by Great Bike Gear. The mounting system is a formed chrome plate mounted under the fender rail on the deuce to provide mounting points for the Easy Brackets. The original turn signals remain in the factory location. This model is typicaly used with small to medium saddlebags.

Dyna Glide

• FXD/FXDI  Dyna Super Glide (96 to 2004) ( 2005 with Hard Mount Backrest use DNA-L1SG) 
  FXDC/FXDCI  Dyna Super Glide Custom (96 to 2005)
  FXDL/FXDLI  Dyna Low Rider (96 to 2005)
  FXDX/FXDXI  Dyna Super Glide Sport (96 to 2005)
  FXDXT/FXDXTI  Dyna Sport Touring (96 to 2005)
  FXDWG/FXDWGI  Dyna Wide Glide (96 to 2005)

Used on all Dyna models 96 to 2005. The docking posts attach to the front existing bolt hole and the turn signal hole after the turn signal is relcated. Turn signals is relocated off the fender to use all DNA models. Turn signal relocation kits available from Great Bike Gear.

Used on all Dyna models 96 to 2005 with Hard Mount Backrest. This is the same bracket as the DNA-R1 but comes with longer mounting bolts. The backrest is not provided and must be purchased separately.

FXD: 2005 Dyna Super Glide with Hard Mount Backrest. This is the same bracket as the DNA-L1DB but comes with different bolts.

FXDI  Dyna Super Glide 2006 & later
FXDCI  Dyna Super Glide Custom 2006 & later
FXDLI  Dyna Low Rider 2006 & later
FXDI35  35th Anniversary Super Glide 2006
FXDBI  Street Bob 2006 & later

Fits 2006 and later Dynas with or without Hard Mount Backrest except FXDWGI. Turn signals must be relocated off the fender al models. Turn signal relocation kits available from Great Bike Gear.

Fits all 2006 and later Dynas except FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

Fits 2006 and later FXDWGI with or without Hard Mount Backrest.

Fits all 2006 and later Dynas FXDWGI with Detachable Backrest. Use the same docking points as the detachable backrest (10 3/8" apart). The docking posts mount outside the detachable hardware. The detachable hardware is not provided and must be purchased separately.

FXR

FXR & FXLR Models 90 & later. Note: Does not fit FXRP. This model is used on the FXR models. The docking posts attach to the front hole in the fender rail and the turn signal hole after the turn signal is relocated off the fender rail. Note: Turn signals must be relocated off the fender on all FXR models. Great Bike Gear does not currently offer a turn signal relocation kit for this model. This model is typically used with small to medium saddlebags.

FLH

Older Harley Davidson FLH Models. This model is used on the older FLH models. The docking posts attach to the two mounting holes in the fender rail. Holes must be 7 1/4" center to center.

Sportster

• XL 883R                                               XL 1200C  Custom
  XL 883L  Low                                      XL 1200R  Roadster          
  XL  883                                                XL 1200L
  XL  883 Hugger
  XL 883C  Custom

This model is used on all sportsters 94 to 03. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is the standard Easy Bracket depth. This model may be used if a smaller saddlebag is used and located behind the rear shock. Turn signals must be relocated off the fender on all Sporster models. Turn signal relocation kits available from Great Bike Gear.

This model is used on all sportsters 94 to 03. Works with or without hard mount backrest. The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail. This model is deeper than the standard Easy Bracket to provide clearance outside the rear shock. The model SPT-R1S may be purchased if a smaller saddlebag is used and located behind the rear shock. This model is typically used with small to medium sadlbags. Turn signals must be relocated off the fender on all Sporster models. Turn signal relocation kits available from Great Bike Gear.

This model is used on all sportsters 94 to 03.  The docking posts attach to the front hole in the fender rail and the rear hole on the fender rail.This model is the standard Easy Bracket depth.  This model may be used if a smaller saddlebag is used and located behind the rear shock.

This is the same bracket as the SPT-R1 but is used with a Detachable Backrest and comes with longer bolts.

This is the same bracket as the SPT-R1S but comes with different hardware due to changes made in 2004. Fits 04 & later.

This is the same bracket as the SPT-R1 but comes with different hardware due to changes made in 2004. Fits 04 & later.

This is the same bracket as the SPT-R2S but is used with a Detachable Backrest and comes with different hardware.